Turbo Warrior + 1 Gauge Kit (Boost1, Boost2, Intake & Exh Temp)


This kit consists of a Gauge with Turbo Warrior Plus 1 software loaded and a Turbo Warrior Plus 1 Scaler adapter with integrated harness and integrated 2x 75 psi Boost Sensors, Intake Temp sensor and K-type metal jacketted exhaust temperature sensor, bracket and SD card with USB reader.


Part # RRG-0000222
Kit Price: Turbo Warrior+ 1, with Scaler Adapter 499.50

Includes:
1. Main Gauge Assembly with Wiring Harness with SBT+1 programming
2. SBT+1 Scaler Box with built in wiring harness and two 75 PSI boost sensors
3. Intake Temperature Sensor with Pigtail
4. K-Type Thermocouple
5. A-Pillar Bracket
6. SD Card (2 gig) with USB Reader


The Turbo Warrior Plus 1 is configured to read out Boost, Drive Pressure Exhaust Temp and Intake temperature

Will the Turbo Warrior Plus 1 work with any turbo or supercharger install? Yes!

The Turbo Warrior Plus 1 system comes equipped with its own boost sensors - so no need to interface with your vehicle computer. It features customizable Audible and Visual over/under warnings as well as high value tattle-tails.

Every unit is equipped to Datalog with only an inexpensive microSD card of any size. It is field upgradable for both the Code and Graphics Data. Two Automotive Grade 0-100 PSI sensors are built in so no need to fight OBD-II/III update rates or incompatiblities.

Thermocouple, Pressure Sensors and Intake Temp sensor are included with this kit.

Click Below for more Info about our gauges:

page maintained by bcarpenter@roadragegages.com last updated February 1, 2014